Process Of Resetting The ATT Router

ATT routers are one of the popular choices for setting up a Wi-Fi network. You can use it for an office setup or to connect your home devices. It is compatible with computer, laptops, smart phones and iOS devices. They support wireless technology you can connect all your devices hassle free. But sometimes you face issues where the router is not able to connect to the internet and hence your devices do not work. In that case, you can perform ATT reset router. Some users forget the login credentials, especially the password of the router and then you are unable to access the settings if you want to Modify anything. In these case, AT&T reset router is the best and most effective solution. You can perform the reset using the reset button. The process will set back everything to default factory settings. You can thereafter, login through the default credentials and change the settings. Let’s have a look at the steps on how to perform the reset.

Steps to reset ATT router:

•  Plug the router to an electric socket and press the power button to turn on the router.

•  Look for the reset button of the router. It is usually located at the back of the router.

•  Press and hold the reset button for 10-15 seconds.

•  Release the button when you see the lights on the router starts flickering.

•  The router will now restart.

•  You can now login through the default credentials and configure the router.

If the broadband or the service status light turns green, the ATT Uverse reset router is successfully completed. Then, you can access the ATT router settings by entering the default credentials. When you reset the router its settings will change into default settings which are known to all and therefore not necessarily safe. In order to protect your connection you must change the username and password by logging in through default credentials. Type 192.168.0.1 in the URL section of the web browser and you will be directed to the login page. Here’s how to find ATT router access code.

Steps to find IP address:

•  Go to the gateway settings.

•  There is a system information tab there.

•  Click on that and enter your current code.

•  You will find the default code on the side. It is usually 192.168.1.1 or 192.168.0.1.

• You can then login and modify the settings. Then, click on apply to save the settings.